10B-113 signed - Zayac - 09-09-2015 - FP PermitHYDRAULIC DESIGN AREA 1REMOTE AREA LOCATION - BEDROOM 3CALCULATED DENSITY - .05 GPM/SQ FTOPERATING AREA - 2 MOST REMOTE HEADS(2) K4.4 SPRINKLERS OPERATING MAXIMUM AREA PER HEAD - 400 SQ FTPRESSURE REMAINING 11.78 PSITOTAL DEMAND - 36.43 GPM @ 42.21 PSIRESIDENTIALNOTE :The Blazemaster CPVC fire sprinkler product is a Life Safety Assembly and must be treated carefully. Please readthe following before any activity which could contact this system:Read and follow the CPVC manufacturer's Installation Instructions. Training by an authorized representative isavailable and is recommended. Proof of training may be required by local authorities.CPVC piping components may be damaged by certain substances used in construction and building maintenance.ONLY system compatible materials including, but not limited to solvent cements, caulks, sealants, cutting oils andthread pastes as noted by the manufacturer's installation instructions should be used in contact with this system.DO NOT expose CPVC products to incompatible substances, such as cutting oils, non-water based paints, packingoils, traditional pipe thread paste and dope, fungicides, termiticides, insecticides, detergents, building caulks,adhesive tape, solder flux, flexible wire/cable (with special consideration for communications cabling), andnon-approved spray foam insulation materials.DO NOT expose CPVC products to edible oils, solvents, or glycol-based anti-freeze fluids.When combining metallic pipe and fittings with CPVC products in a system, the cutting oil should be removedprior to assembly.DO NOT store CPVC products in containers with metal products where it may become damaged or contaminatedwith packing oils.DO NOT handle CPVC products with gloves contaminated with oils (hydrocarbons) or other incompatiblematerials.Failure to follow the manufacturer's installation instructions and this notice may cause cracks or fractures todevelop in CPVC products, resulting in property damage due to leaks or flooding. The presence of any visiblecracks may require partial or full system replacement. Please contact the manufacturer for additional information.TANK AND PUMP MANIFOLD DETAILSEISMIC BRACINGHANGER ASSEMBLY DETAILSINSULATION DETAIL