Loading...
10801 TOILET AND BATH add1 28Jan11Smith College Public Safety Relocation Project ISSUED FOR BIDDING 1/24/2011 Smith College Facilities Management ADDENDA #1, 1/28/2011 Smith College Northampton, Massachusetts TOILET AND BATH ACCESSORIES 10801 - 1 SECTION 10801 - TOILET AND BATH ACCESSORIES PART 1 - GENERAL 1.1 SECTION REQUIREMENTS A. Submittals: Product Data. PART 2 - PRODUCTS 2.1 MATERIALS A. Stainless Steel: ASTM A 666, Type 304, No. 4 finish (satin), 0.0312-inch (0.8-mm) minimum nominal thickness, unless otherwise indicated. B. Mirrors: ASTM C 1503, Mirror Glazing Quality, clear-glass mirrors, nominal 6.0 mm thick. C. Galvanized Steel Mounting Devices: ASTM A 153/A 153M, hot-dip galvanized after fabrication. D. Fasteners: Screws, bolts, and other devices of same material as accessory unit, tamper and theft resistant when exposed, and of galvanized steel when concealed. E. Keys: Provide universal keys for internal access to accessories for servicing and re-supplying. Provide minimum of six keys to Owner's representative. 2.2 TOILET AND BATH ACCESSORIES A. Manufacturers: 1. Bobrick 2. Provided by Smith College where noted. B. Paper Towel Dispenser: 1. G.C. to install College provided paper towel dispenser at 42” to paper towel dispenser controls. 2. Location to be determined in field by Architect. 3. Count: one (1) per restroom, two (2) total C. Toilet Tissue Dispenser: 1. Bobrick B-2740. 2. Count: one (1) per restroom, two (2) total D. Liquid-Soap Dispenser: 1. G.C. to install College provided soap dispenser at 42” to dispenser controls. 2. Location to be determined in field by Architect. 3. Count: one (1) per restroom, two (2) total Smith College Public Safety Relocation Project ISSUED FOR BIDDING 1/24/2011 Smith College Facilities Management ADDENDA #1, 1/28/2011 Smith College Northampton, Massachusetts TOILET AND BATH ACCESSORIES 10801 - 2 E. Grab Bar: 1. Material: Stainless steel, 0.05 inch (1.3 mm) thick. 2. Mounting: Concealed. 3. Gripping Surfaces: peened. 4. Outside Diameter: 1-1/2 inches (38 mm) for heavy-duty applications. 5. Length: 42” 6. Model: Bobrick B-6806.99 x 42” (1.5” dia w/ peened finish). 7. Count: two (2) per restroom, four (4) total F. Sanitary Napkin Disposal Unit: 1. G.C. to install College provided unit 2. Count: install one (1) unit in the Women’s Restroom 100T5 G. Mirror Unit: 1. Size: nominal 24” x 48” 2. Frame: Stainless-steel channel. 3. Material and Finish: Stainless steel, No. 4 finish (satin). 4. Model: Bobrick B-154 2448 5. Count: install one (1) mirror in each restroom, two (2) total. H. Robe Hook: 1. Mounting: back of door, 48” above finished floor. 2. Description: Single-prong unit. 3. Material and Finish: Stainless steel, No. 4 finish (satin). 4. Count: install one (1) hook in each restroom, two (2) total. PART 3 - EXECUTION 3.1 INSTALLATION A. Install accessories using fasteners appropriate to substrate indicated and recommended by unit manufacturer. Install units level, plumb, and firmly anchored in locations and at heights indicated. 1. Install grab bars to withstand a downward load of at least 250 lbf (1112 N), when tested according to method in ASTM F 446. B. Adjust accessories for unencumbered, smooth operation and verify that mechanisms function properly. Replace damaged or defective items. Remove temporary labels and protective coatings. END OF SECTION 10801