25C-251 (55) Project No.100119610M1D-062 May 24,2010
Ferrari U le Corp. Page 3 of 3
:CONCLUSION
THIS TEST SPECIMEN Passed THE NFPA 701 TEST 2 FIRE TEST
This report is for the exclusive use of interteles Client and Is provided pursuant to the
agreement between Intertek and Its Client kdert+ekt responsiblltty and/)ability are limited
to the torms and conditions of the agreement Intertek assumes no liability to any party,
other fhan to the Client In accordance with the agreement; for any loss, expense or
damage occasioned by the use of this report Only the Client Is authorized to copy or
dtstribute this report and then only In ifs enflrefy.Any use of the infertek name or one of its
marks for the sale or adverihmmant of ft tasted material,product or service must first be
approved In wrtttng byintertalk The observations and fastrasuKs In this report are 1wevant
only to the sample tested.This report by Ruff does not Imply that the material,product;or
servke is or has everbeen underan lnt+ertek certMcatlon program.
This report contains a total of 3 pages.
1
-May 24.2010
Andrew Maximiuk
`Lab Technician 11
Reviewed and approved:
May 24,2010
_.-.__.Stewart_Relyea__
Team Leader . ._
Project No.100119810MID-002 May 24,2010
Ferrari Textile Corp. Page 2 of 3
SUMMAk OF TEST PROCEDURE
10 specimens of material 4.9 In.x 47.25 In.are cut with their long dimension parallel to
the length direction("with"machine). The test specimens are conditioned to 220-225°F
(105-108°C)for not less than one hour and not more than 3 hours. Specimens are
removed from the oven one at a time and tested Immediately.The specimens are
supported with clips In a three-sided vertical column and exposed to an 11'flame for
two minutes. The flame impinges approximately 7 inches on the specimen.
TEST CRITERIA
-No specimen shall continue flaming for more than two seconds. Length of char shall
not exceed 17.1 inches from the bottom edge of the specimen. No flaming on floor of
apparatus j8 allowed for longer than two seconds.
TEST RESULTS
Afterflame Floor Char
S cimen Duration sec Flaming sec Len in.
1t? 1 11.75
2 0 0 11.00
3 0 0 12.76
4 0 0 11.00
5 0 0 9.50
6 0 0 9.75
7 0 0 11.00
8 0 0 9.75
8 0 0 6.50
10 0 0 9.50
Average 0 0.1 10.55
.... .....--_.
Paget or3
NFPA 701 -2004 FIRE TESTS FOR
FLAME-RESISTANT TEXTILES AND FILMS
METHOD Z"'
Client Ferrari Textile Corp.
Address: Ferrari Textile Corp.
1510 SW a Court
Pompano Beach,Fl.33068
U.S.A.
Received Date: April 30,2010
(This sample was received in good condition)
Test Date: May 5,2010
Report Date: May 24,2010
Project No: 100119610MID-042
$ample Identification: MID 1004301224-001
Dest:riotion Precontraint 702 Opaque(Blackout)
Sample Prepairatlon: Specimens prepared by client.
Environmental Conditions: 66°F and 33%r.h.
This Teat Witnessed by: NIA
'TMe material was not subjected to the accelerated water leaching procedures.
Interttk Testing tiervicca NA,Ina
431
Middleton,Wl 53562
Telophone:609-5364400 Fm 1-60 8431-9279
e-mntfl:www.TntettA-ettsomko.cam
Serge Ferrari February 28,2012
Report No,100572302COt1004 Page 7 of 7
6 Conclusion
The samples of PVC Precontraint 702 fabric submitted by Serge Ferrari therefore met the
,requirements of CAN/ULC-5109-03, Standard for Flame Tests of Flame-Resistant Fabrics and
Films,small and large flame test
PVC Precontraint 702 fabric Maximum Spread Average Spread Floor Hum
of Flame of Flame a 2 seconds
Small Flame Samples 23mm 20mm No
Small Flame(Weathered) 18mm 18mm No
Large Flame Samples 168mm N/A No
The conclusions of this test report may not be used as part of the requirements for Intertek
product certification. Authority to Mark must be issued for a product to become certified.
INTERTEK TESTING SERVICES NA LTD.
Tested andr .
Reported by: ir
G.. g i
Technician-Bui ing Products resting
Reviewed :
b Y
co Leduc, EIT
Reviewer, Fire Testing
Serge Ferrari February 28,2012
Report No.100572302COQ-004 Page 6 of 7
5.1.2. Small Flame Weathered Test Results
Sample No. Fabric After Burn Damaged Flaming Drip Floor Bum
Direction sec. Length mm M sec.
1
Warp 0 18 N N/A
2 Warp 0 17 N N/A
3 Warp 0 18 N N/A
4 Warp 0 16 N NIA
6 Warp 0 18 N NIA
6 Weft 0 17 N NIA
7 Weft 0 18 N NIA
8 Weft 0 18 N NIA
9 Weft 1 0 19 N N/A
10 Weft 1 0 18 N N/A
Average Damage Length: 18mm
Large Flame Test Results
Sample No. Fabric After Burn Damaged Flaming Floor Burn
Direction sec. Len mm Drip IN sec,
1
Warp 0 153 N N/A
2 Warp 0 161 N NIA
3 Wa 0 159 N NIA
4 ; Wa _.,9 168 N N/A
5 "War 0 158 N NIA
6 Weft 0 141 N NIA
7 Weft 0 149 N NIA
$ Weft 6 157 N NIA
9 Weft 0 166 N N/A
10 'Weft 0 158 N N/A
Maximum Damage Length: 168mm
5.1.4. Additional Flaming
There was no flaming drip or burning sample on the floor of the test apparatus.
Serge Ferrari February 28,2012
Report No.100572302COQ-004 Page 5 of 7
4.4. ACCEPTANCE CRITERIA
A sample will meet the requirements of CAN/I1LC S109 if the following criteria are met:
Small Flame and Weathered Samples
• Portions or residues from the test specimen which break or drip from the sample
during the test shall not continue to burn for more than two seconds on the floor
of the test apparatus.
• The vertical spread of flame and smouldering combustion shall not exceed
190mm on any one specimen and shall not exceed 165mm on an average of ten
specimens.
Large Flame Samples
• Portions or residues from the test specimen which break or drip from the sample
during the test shall not continue to burn for more than two seconds on the floor
of the test apparatus.
• The vertical spread of flame and smouldering combustion shall not exceed
250mm on any one specimen.
5 Testing and Evaluation Results
511. RESULTS AND OBSERVATIONS
5.1.1. Small flame Test Results
Sample No. f=abric After Burn Damaged Flaming Floor Burn
Direction sec. Length(mm) Drip YIN sec.
1 Wa 0 21 N NIA
2 Warp 0 19 N N/A
3 Warp 0 19 N N/A
' ._..... --- - -W-- ---0 ----1.8-_ .._._ N...--_�NlA— --------_.,
5 Warp 0 20 N N/A
6 Weft 0 18 N N/A
7 Weft 0 19 N N/A
8 Weft 0 23 N NIA
9 Weft 0 20 N NIA
10 Weft 0 19 N N/A
_ __ -._..Average Damage Length: - ... __ 20MM
Serge Ferrari February 28,2012
Report No.100572302COQ-004 Page 4 of 7
3.2.2. Sample Conditioning
All the test samples were subjected to the Water Leaching in section 5.3 and the
Scrubbing in section 5.4,prior to being dried in an oven for at least 30 minutes at 105'C.
In addition to the above conditioning the small flame weathered samples were subjected
to the accelerated weathering in section 5.5.
3.2.3. Sample Mounting
Small Flame and Small Flame Weathered Tests
The test samples were placed In the specimen holder, with clamps along each edge of
the sample, leaving the ends free and exposing a surface area 50mm wide by 250mm
tong. The holder was then placed in the test apparatus.
-Large Flame Test
The test samples were placed in the specimen holder, with clamps along each edge of
the sample, leaving the ends free and exposing a surface area 125mm wide by 800mm
tong. The material was then placed In the test apparatus.
Ten trial runs were conducted for the small flame,large flame,and weathered samples.
4 Testing and Evaluation Methods
4.1. SMALL FLAME TEST
Once the specimen holder was In place,it was held 20mm above the centre of the opening of a
Bunsen burner. The burner was supported in such a way that it was 25°from the vertical. The
burner supplied a flame 40mm long,with the intake air supply shut off. The flame Impinged the
sample fora period of 12 seconds.
4.2. SMALL FLAME WEATHERED TEST
The test specimen were weathered for 360 hours in a Ultra Violet Condensation Screening
device model UV 20001,TS ID#D2731 weathered in accordance with Section 5.5 of the ULC-
S109M Standard for,Flame Tests of flame Resistant Fabrics and Films standard. Once the
specimen holder was in place, it was held 20mm above the centre of the opening of a Bunsen
burner. The burner was supported in such a way that It was 250 from the vertical. The burner
supplied a flame 40mm long,with the intake air supply shut off. The flame Impinged the sample
for a period of 12 seconds
4.3. LARGE FLAME TEST
Once the specimen_was In place, it was held 100mm above the centre of the opening of a
- -- - ---------Bunsen-burner.—The-bumerwas-supported-in-such-a-way that-it was 250froM the vertical.-The
burner supplied a flame 280mm tong, with the intake air supply shut off. The flame Impinged
the sample for a period of 120 seconds.
Serge Ferrari February 28,2012
Report No.100572302COO-004 Page 3 of 7
2 Introduction
lntertek Testing Services NA Ltd. (Intertek) has conducted testing for Serge Ferrari, on PVC
Precontraint 702 fabric to determine whether the submitted samples would meet the small and
large flame requirements of CAN/ULC S109-03, Standard for Flame Tests of Flame-Resistant
Fabrics and Films. This evaluation began February 23, 2012 and was completed February 27,
2012.
3 Test Samples
3.1. SAMPLE SELECTION
Samples were submitted to Intertek directly from the client and were not independently selected
for testing. Samples were received at the Evaluation Center on November 29,2011.
3.2. :SAMPLE AND ASSEMBLY DESCRIPTION
"3.2.1. Material Specifications_
Material Description
The samples consisted of a PVC fabric that was white in colour and had a discernible
warp and weft orientation. The material was Identified by the client as PVC'Precontraint
702 fabric with a thickness.of 0.57 mm and a weight of 750 g/m2.
Small Flame Test
A total of ten samples were cut from the submitted material, each measuring 250mm In
length and 90mrn In width. Half the samples were cut in the direction of the weft and half
were cut In the direction.of the warp,
Smag Flame Weathered Test
A total of ten samples were cut from the submitted material, each measuring 250mm in
length and 90mm in width. Half the samples were cut in the direction of the weft and half
were cut in the direction of the warp.
Large Flame Test
A total of ten samples were cut from the submitted material,each measuring 800mm In
length and 125mm in width. Half the samples were cut in the direction of the weft and
half were cut in the direction of the warp,
Serge Ferrari February 28,2012
Report No.100572302COQ-004 Page 2 of 7
I Table of Contents
PAGE
1 Table of Content s............................................................................................................2
2 Introduction... ...... ...................... ......... .................. ....., .. .,............3
3 Test Samples..................................................................................................................3
3.1. SAMPLE SELECTION...............................................................................................3
3.2. SAMPLE AND ASSEMBLY DESCRIPTION..............................................................3
.3.2.1. Material Specifications.........................................................................................3
3.2.3. Sample Conditioning. ........................................... ......................................4
3.2.3., Sample Mounting.. . .......................................................................................4
4 Testing and Evaluation Methods......................................................................................4
4.1. SMALL FLAME TEST... ........................................ . ........... ........................4
4.2. SMALL FLAME WEATHERED TEST........................................................ 4
4.3. LARGE FLAME TEST. ............................. ...................... ..... ......4
4.4. ACCEPTANCE CRITERIA.........................................................................................5
5 Testing and Evaluation Results.......................................................................................5
5.1. RESULTS AND OBSERVATIONS.............................................................................5
5.1.1. Small Flame Test Results..................................................... ........................ .5
5.1.2. Small Flame Weathered Test Results..................................................................6
5.1.3. Large Flame Test Results....................................................................................6
5.1.4. Additional Flaming.......................................... .... ... ... ..6
6 Conclusion......................................................................................................................7
REPORT NUMBER: 100572302COQ-004
ORIGINAL ISSUE DATE: February 28,2012
EVALUATION CENTER
Intertek Testing Services NA Ltd.
1500 Brigantine Drive
Coquitiam,B.C. WK 7C1
;RENDERED To
Serge Ferrari
Zone Industrtelle B.P.54
38352 La Tour Du Pin Cedex
France
UjPRODUCT EVALUATED: PVC Fabric
`EVALUATION PROPERTY: Flame Resistance
Report of testing PVC Precontraint 702 fabric for compliance
with the applicable requirements of the following criteria:
CANNLC 51..09-03, Standard for Flame Tests off
Fabrics and Films. -
This report Is far the exclusive use of Interteks Client and Is provided pursuant to the agreement between Intertek and Its Client
Intertek's responsibility and liability are limited to the terms and conditions of the agreement.Intertek assumes no liability to any
party,other than to the Client In accordance with the agreement,for any loss, expense or damage occasioned by the use of this
report. Only the Client is authorized to copy or distribute this report and then only In Its entirety.Any use of the Intertek name or
one of Its marks for the sale or advertisement of the tested material, product or service must first be approved In writing by
Intertek. The observations and test results in this report are relevant only to the sample tested. This report by Itself does not Imply
that the material,product,or service is or has ever been under an Intertek certification program.
1
j , ; a
E ± '
o
�tll-j tlj
N
0052
y O
N
Y
L7-. o_ ��
of
a� ._�,.�•�' �---'�" � of
CD
CD — a
-It o: CD
j
i a
°
cl
N`
i f
:
0009
i
i
Iu ,
i NN
ooae
49t
01019
dd
cc)
E �
N^4{'
..o
O; v -
cv a z3 0 c
IQ
j � r
d
x
E s
a
a
3 �
V1
ao9a t
J+ O up'1 O pi N
r � N
O
O
' N
M
oosa�
--1
CALIFORNIA
TATS FIRE MARSHAL .
REGISTERED FLAME RESISTANT
PRODUCT
REGlSS`RAT10H NO, _._T-444.02
PRC DUD 1 NAME: "PRFCONTRAINT 702"
PRODUCT MARKETED BY: FERRARI SA
PO BOX 54 LA TOUR DU PIN
FRZ1V CL
This prcduct meets the minimum requirements of flare resistance'escablished by
the State Fire .4rshal for products identified in the California Health and
Safety Code Section 13115,
The Scope Of the approved use of this product is provided in the curt-ent
edifion of 'California Approved List at' Fl ime Retardant Chemicals" and Fabrics,
General and Limited Application Concerns,"
DUANE MA i T HE�IJS, Program Coordinator
Laboratory/Chem, icals/Fabrics
�dg8l0 S�
G
0
1 T
dIC I RAZIa__ NE pi CoN;oRr�i�i A'
DISTRIBUTORE DEL T ESSU T O . .
F LL•i GIOVANARDi
Nay DI GIOVANARDI CARLO C, SNC
VIA G,MARCONI N.63
46039 VILLIMPEN TA-
MANTOVA-I i ALiA
TEL. 0376/5720227-572011
FAX 0376/667687
Noi cerEifichlarno the 11 tessuto: PRECONTP,AINT 702 da not denominato
Prodotto nel 9993 PC 1 8702 ,
oggeito Bella bona di consegna FERRARI n.153064 d=
CANOBBIO SPA-VIA ROMA CAS T EL NUOVO (AL) �(30.04,1gg8 per la dit`ia
6 stato dlchlarato conforme alle sottoelencare norms:
DIN 4102 B1 -GERMANIA
BS 7837-REGNO UNITO
NFP 92503(M2)-FRANCIA
SIS 65 00 82-SVE71A
LINE 23 72-3 90(M2)�SPAGNA
CAI IFORNIA STATE FIRE MARSHAL- USA
NFPA 701 -USA
i cui rapporii di prova vi lnv aino in allegato
Villimpenta, 11 30 04 98
Timbro del distributors -
Firma d (distributors
D I Y I
IL +rr�°Warn rue
Vti R.Rit'�fC1,y;CiTO(PF7C:( tAlq i:l{I}
Modalifa d'uso: 1)IMPIEGO: `t endone
2) POSA IN OPERA: so$peso susceitiblle di prendere fuoco su
ambo ie facce
3
v vf�
A
` A'10V,
N-FPA 701 1989 Fite Tees for
Ff LKE-RESISTANT 1EX7tL-EES AND FICMS
Prepared-for: Ser96 F era ,S:A.
Vroiect-No.: 91090 lest Date: 114191
CZiept No.: -1003 '!estEnjineer: Deg Priest
Specimen ID: Architsctu2l Fabric; t Rr,CON'!RARFIC 702
Description: PVC Coated, 1100 Dtax n6iyest-�r Yam' .
Fabric Weight! 22 ozlsq.yd.
i.
Method Used: Small Scale e Sheet
EST PES tTLTS
A_iterfl=e Flaming or Char
Spe-cimen Di.,ection Duration(sec) Drips (sec) ,
1 Machine 1.0 0.0 2.5
2 Machine 0.0 0.0 3,0
3 Machine 1.0 0.0 2.8
Machine 1,0 0.0 3.0
5 Machine 0.0 0.0 3.0
6 Crass 0,0 0.0 2.5
7 cross 0.0 0.0 3.0
8 Cr,?ss 1.0 0.0 2.8
9 cross 0.0 H 2.5
10 Cross 0.0 0,0 3,0
Avez-age 0.4 0,0 2.8
Aftarfipma requirements(None>2 Sec.): PAf$SED
klamingDn-ps requirements(None Allgwed): PASSED
Char l.,--ngih requixements (None>4.5;AVeraje�3.5) '�LSSED
"Al-;,1
Deggax N,Priest,President Date
6S63 A.s?mo Downs Parkway
San Antonia,Ter-as tb238
512/E47--5253
TELEX: 9102400825 SWCS UQ
FAX.; 512f 347-06i5 0
A �4
a
..T.
trf$L�I7 je f{RECONTRAIN 702
Produce tore SERGE >^ERRARI SA
i
Sfafe lY�ra fit°cea fcafel lssued Qaf-a Expiry a-tansion .Enclosed
proof bom logaf on by mli rcafd date to fhe
hor„ologafion supplying
SvrEB�ii SIS 650082 3203(88 BOVEPKE T 05103190
S�`6"�
FFmnva W2 124a/a4 PIP, I all M 981111°9
Great TN251782❑ P.P.T. 04-112197 041112002
Britain
Spain
.ri � ny DIN 4102 BI PA-11122993 Q.I.B. /8105/94 81/03199
United n
States
Un i Led
Si--,Le-G C.S.P.M. X
Cali;ornia
- i he pros pc c rzitjcare isissuea in original copy;We'hsreiore inlstrusi the use of oilier copies
made in any Way.
' r �
For CA ' BSIO p.A.
Rob 01 5FO �OB8r0.
Tei;ht'I10R!MaMer C) sA
Pag,2 2
to Ca�Pv
4lREZIONE-,VIA ROtv1A,3-15053 CASTELNUOVO SCRIVIA(AL)-TEE.(0131)823353 rlc. tut. -.FAQ(0131)&23521
STA6ILI S,!Swada SSsrhuclo.15053 Cesielnnovo scd0a(AL)-Tel=(0131)6551 42-C.F./?,IVA G3^a33320157
a,�h,QhG CIRCUS SMIRKUS
Ins. : `1 CIRCUS ROAD.
vs,mp., GREENSBORO,VERMONT
wzcrte: U.S.A.
C.Art-W400VOS.: a1661� 9a
�cc> 0NFORMI lY CER-TIFICAI E"FIRE PROOF CER t IFICA l E" No.981048
PLAN :30850- PFC No .420
MATERIAL ;No. 1 CIRCUS TENT IMAM,24 M.WITH SIDE WALL INGS
No, `1 TENTS 6x6 M
WRI iNVQicF No, 325 of the �I j a
According to the current norms for•tha,rire prevention the undersigned CANOBBIO S.p.A. In
its capacity of supplier of the material-in object
DECLARES
........
on its own civil and penal responsibility that in the manufacturing of No. I circus tent diam. 24
mt. with side v aliings > Igo. '1 membrane for tent dimensions M' L with side wallings
accomplished.on MAY 1998 it has been used the following material
cR8°aer�
Peg, 1 /2
r,
( r
� R
I O W Q
N W CJ
C
ss � '
l '
C) LO
° a I CL o
ICN a Cl-
.2
�' ■�■ 34 _ y'.
� 1 I
aIIp ,I -
LJ
C) �
CJ
Ln
l
C)
o
1/ f cd
rte,
O O;
O pI O
�
C j N N
I _
l 06
°
M O Q
i
x
0$'S 05'£
00'6
00'11
F Z' 05'£
OL'ti
i
aY•,t
r;(n56.1�
o
O
n
f < 2
cl
f }t
L
h�o
LLJ
LLI
DO
r
r 1
r--1
w }
I
it
MAR
2 8 2014
- actions
KitcZien
(� Sacklot Par -Ixg
r r <� Srin.3�liouse#4
— C> X311Ck-lUjP Mv—XMC13.S
SZUause#3 Grey Water 2 Flat $edTra3ilers
F— tanks and distro Semj ''j`r ctpY'/mvvu jeY'
box
S�znZrl�OUSO#�2
Judy Goeth
}{ Circus Operations Director I tt
NV 1 Circus Road
r Greensboro,VT 05841 /
0 (r� U5Ax r
h; eft Tel:(802)533-7446 x20 l � r
G Fax:(802)533-2480 :>
1; judy @smirkus.or•g r '•,
Ev4vGV.smirkus.org {� f
AM Aqh
AW's_J&,;U%,
Rackstarge Tent
30'X60'
16
1 Big Top _
230'
1 PI I Circus Smirkus
112' ip Lot Dimensions
2014
Concession
40'X80'
Kitchen
Sacklot parking
` � � Sunkliouse#4
4-6 Bog Txucks
6 Pick Up Trucl�s
"' house#3 2 Flat Bed Trailers
Grey Water
tanks and distro 1 Sexial Tractor/Trailer
box
Sun7achouse #1
Sunlihouse#�
Judy Gaeth
Circus Operations Director *
0 �!� 1 Circus Rood /
r$ Greersboro,VT 05841 / a
0 eM USA
Tel.(802)53443 x0
0 Fax:(802)5 -2480
judy @smirkusorg
* -'t
m-m.srnirkus.org y
OMOUS S
Backstage Tent
30'X60'
10, Big Top -
230'
10' Circus Smirkus
112` Lot dimensions
2014
Concession
40'.X80'
City of Northampton
Massachusetts
W
•�,°
V1,
DEPARTMENT OF BUILDING INSPECTIONS
J 212 Main Street • Municipal Building
" Northampton, MA 01060
` TENT PERMIT APPLICATION
(For Tents over 120 square feet)
iria=aas..a
Permit Fee: $25.00 Check# 3 3
PLEASE TYPE OR PRINT ALL INFORMATION
1. Name of Applicant: r H S -/-,i, ✓ rG d S .5- y l r �� s
13 �, 2 � �L
Address: u g5 £� �.rt - Telephone:
2. Owner of Property:_'tr v r f h- f"�1[v �•n l`� C �,S�� �Gs�
Address: �I ( r `i'd /7/�. GS/efF Telephone: IQ 1 3 5V q
3. Status of Applicant: Owner VContractor
4. Tent Location Address): ( 1A +^ 4- 6, k ii r �i co✓+���5
y %i rl" ST n 4
Parcel ILt,.Zomng MaA# Parcel# Dstrict(s)'
(TO E FILLED IN .TE E F3UILDING 17_EP RTRENT)
5. Use of Property: Residential: Commercial: L-*'-
6. Description of Tent:
-Fk rY t
Size: 119�bvltWlj 1P`� ¢
Occupant Capacity: 9," 7P.,
Dates of Use:
7. ALL INFORMATION MUST BE COMPLETED: PERMIT CAN BE DENIED DUE TO LACK OF INFORMATION.
8. Certification: I hereby certify that the information contained herein is true and accurate to the best
of my knowledge.
DATE: 3 3 -q _ APPLICANT'S SIGNATURE f
v"2 �d4ra
NOTE: Issuance of a permit does not relieve an applicant's burden to comply ith all zoning requirements
and obtain all required permits from the Conservation Commission, Department of Public Works and other
applicable permit granting authorities._
FAIR ST-FAIRGROUNDS BP-2014-1020
GIs#: COMMONWEALTH OF MASSACHUSETTS
M Block: 25C-251 CITY OF NORTHAMPTON
Lot: -001 PERSONS CONTRACTING WITH UNREGISTERED CONTRACTORS
Permit: Building DO NOT HAVE ACCESS TO THE GUARANTY FUND (MGL c.142A)
Category:Tents BUILDING PERMIT
Permit# BP-2014-1020
Project# JS-2014-001768
Est.Cost:
Fee: $75.00 PERMISSION IS HEREBY GRANTED TO:
Const.Class: Contractor: License:
Use Group: Homeowner as Contractor
Lot Size(sq.ft.): Owner: HAMPSHIRE FRANKLIN&HAMPDEN AGRICULTURAL SOCIETY
Zoning: SC(100)/U (1)/ Applicant: NORTH STAR
AT. FAIR ST - FAIRGROUNDS
Applicant Address: Phone: Insurance:
135 RUSSELL ST (4 VI) 582-0193 ()
HADLEYMA01035 ISSUED ON:41712014 0:00:00
TO PERFORM THE FOLLOWING WORK.-ERECT CIRCUS TENTS - 7/29-7/30/14
POST THIS CARD SO IT IS VISIBLE FROM THE STREET
Inspector of Plumbing Inspector of Wiring D.P.W. Building Inspector
Underground: Service: Meter:
Footings:
Rough: Rough: House# Foundation:
Driveway Final:
Final: Final:
Rough Frame:
Gas: Fire Department Fireplace/Chimney:
Rough: Oil: Insulation:
Final: Smoke: Final:
THIS PERMIT MAY BE REVOKED BY THE CITY OF NORTHAMPTON UPON VIOLATION OF
ANY OF ITS RULES AND REGULATIONS.
Certificate of Occupancy Signature:
FeeType• Date Paid: Amount:
Building 4/7/2014 0:00:00 $75.00
212 Main Street,Phone(413)587-1240,Fax: (413)587-1272
Louis Hasbrouck—Building Commissioner