16B-001 (2) Q
Remove this label after final inspection; SAYE for future reference
Pella Corporation
NFRC Double Hung
Annealed ProLine
One Wide
�latif�na ��astraton Advanced Low — E
Hating C 0,) Argon Gas
CPD #PEL — N — 035
ENERGY PERFORMANCE RATIN S
U — Factor Solar Heat Gain Coefficient
0 1.70 0.21
U.S.11— MetrielSl
ADDITIONAL PERFORMANCE RATINGS
Visible Transmittance
0.50 -- -
Manufacturer stipulates that these ratings conform to applica le NFRC procedures for delerminin
whole product performance. NFRC ratings are determined fora fixed set of environmental Condit!
and a specific product size. NFRC does not recommend any ptoducts and does not warrant
the suitability of any product for any specific use. For more information, call (641)621 -3114
or visit the Pella web site at www.pella.com or visit the NFRG site at www.nfrc.or
Wind Lead
Design Pressure ENE , e , a '
IDPI(Ps� � ✓
+351-35
Per ASTM E330
Canada
Performance
Classification `
CAN -00
A440 -00 • N
A3 Air Leakage
B3 Water Leakage
C2 Wind Resist.
11 Jj LC35 (Performance Grade35)
��,oP� Tested to ANSIIAAMlVNWDA 10111.5.2— 97
..JChC :`,,'Fr9 " °.w,��� „ � H —LC35 33 "x65"
, www.wdmn.eam
WDMA LicenseNumber:411 — - 900 Toted toAAMAIWOMA lCSA10111.S.21fW4U -05
Maaurer se uabr Co msrmaicn 1, tre n I noa saNaras N LC35 838x1651 (33 "x65 ")
WDMA unc Hallmark Certification. Pella products labeled with the Window & Door
M anufacturers Association I Hallmark Certification are tested in aocordance with
applicable WDMA perform once standards, which requires products be tested for air
infiltration, water infiltration, and structural performance. Peformance of Pella products
will change aver time depending upon the conditions of use. For details on Hainnafk
Certificatj on. go to www.wdme.com.
Complies with HUD 111 (Carroll, IA(
Meets or exceeds M.E.C.. C.E.C.. and I.E.C.C. Air Infiltration Requirements
Florida Product Approval Syst rruFPAS) Number FL12952
Texas Dept. of Insurence(TDI) Evaluation Report Number:WIN -694
Glazing type and thicknew Annealed,2.5MMbath panes, designed per ASTM E1300
Window or Door Actual Sire:33.000" wide by65.000" tell
DP35